Running a build configuration

After you create a build configuration, you can submit a run based on that build configuration. Run your build from the console or with the CLI.

Code Engine has quotas for builds and build runs within a project. For more information about Code Engine limits, see Limits and quotas for Code Engine.

Build runs that complete are ultimately automatically deleted. When your build run is based on build configuration, this build run is deleted after 3 hours if the build run is successful. If the build run is not successful, this build run is deleted after 48 hours.

Running a build from the console

Go to the Code Engine dashboard.
Select the project where you created your build.
From the project page, click Image builds.
From the Image build tab, select the name of the image build that you want to work with.
In the Configuration section, you can review the build configuration and change values, if needed.
Verify any additional information, such as the Output image for this build run, or overwrite the Timeout value.
Submit the build run by clicking Submit build.

Monitor your build progress in the Build runs section.

Running a build with the CLI for source from a repository (non-local)

To submit a build run from a build configuration with the CLI, use the buildrun submit command. This command requires the name of a build configuration. Other optional arguments can be specified. For a complete listing of options, see the ibmcloud ce buildrun submit command.

The following example runs a build that is called helloworld-build-run and uses the helloworld-build build.

ibmcloud ce buildrun submit --build helloworld-build --name helloworld-build-run

Example output

Submitting build run 'helloworld-build-run'...
Run 'ibmcloud ce buildrun get -n helloworld-build-run' to check the build run status.
OK

The following table summarizes the options that are used with the buildrun submit command in this example. For more information about the command and its options, see the ibmcloud ce buildrun submit command.

Table 3. Command description
Option	Description
`--build`	The name of the build configuration to use. This value is required.
`--name`	The name of the build run. Use a name that is unique within the project. The name must begin and end with a lowercase alphanumeric character. The name must be 63 characters or fewer and can contain lowercase alphanumeric characters and hyphens (-).

Your build runs begins. Monitor the progress by using the ibmcloud ce buildrun get command.

For example, to check the status of the build run from the previous example,

ibmcloud ce buildrun get --name helloworld-build-run

Example output

Getting build run 'helloworld-build-run'...
[...]
OK

Name:          helloworld-build-run  
ID:            abcdefgh-abcd-abcd-abcd-1a2b3c4d5e6f 
Project Name:  myproject  
Project ID:    01234567-abcd-abcd-abcd-abcdabcd1111  
Age:           21m  
Created:       2021-03-14T14:50:13-05:00  

Summary:  Succeeded  
Status:   Succeeded  
Reason:   Succeeded

For more information about builds, check the troubleshooting tips.

Running a build with the CLI for source from a local directory (local)

To submit a build run from a build configuration with the CLI that pulls source from a local directory, use the buildrun submit command. This command requires the name of a build configuration, and the path to your local source. Other optional arguments can be specified. For a complete listing of options, see the ibmcloud ce buildrun submit command.

The following scenario clones the Samples for IBM Cloud Code Engine GitHub repo into a CodeEngineLocalSample directory on your local workstation.

Clone the Samples for IBM Cloud Code Engine GitHub repo to a subdirectory that is created on your local workstation, such as the CodeEngineLocalSamples subdirectory. From this directory, run the git clone command; for example,
```
git clone https://github.com/IBM/CodeEngine
```
Go to the directory where your source code is on your workstation. For example, go to the CodeEngine subdirectory where the Code Engine Samples reside.

From the directory where your source code resides, submit the build run. The following example runs a build that is called buildrun-local-dockerfileand uses the build-local-dockerfile build configuration. The --source option specifies the path to the source on the local workstation to the helloworld sample.

ibmcloud ce buildrun submit --name buildrun-local-dockerfile --build build-local-dockerfile --source ./helloworld

Example output

Getting build 'build-local-dockerfile'
Packaging files to upload from source path './helloworld' ...
Submitting build run 'buildrun-local-dockerfile'...
Run 'ibmcloud ce buildrun get -n buildrun-local-dockerfile' to check the build run status.
OK

Monitor the progress of your build run by using the ibmcloud ce buildrun get command. For example, to check the status of the build run from the previous example,

ibmcloud ce buildrun get --name helloworld-build-run

Example output

Getting build run 'buildrun-local-dockerfile'...
Run 'C:\Program Files\IBM\Cloud\bin\ibmcloud.exe ce buildrun events -n buildrun-local-dockerfile' to get the system events of the build run.
Run 'C:\Program Files\IBM\Cloud\bin\ibmcloud.exe ce buildrun logs -f -n buildrun-local-dockerfile' to follow the logs of the build run.
OK

Name:          buildrun-local-dockerfile
ID:            abcdefgh-abcd-abcd-abcd-1a2b3c4d5e6f
Project Name:  myproject
Project ID:    01234567-abcd-abcd-abcd-abcdabcd1111
Age:           40s
Created:       2022-01-19T12:22:33-05:00

Summary:       Succeeded
Status:        Succeeded
Reason:        All Steps have completed executing
Source:
  Source Image Digest:  sha256:07159930b5abcf94e1a7451ea18490d4ad1162a77c2b987da5b7493fa1f1e49d
Image Digest:  sha256:04c7be7db438a41040ea24d646314f1c847c191d88fffdbea6f483fc443c2bbe

Build Name:    build-local-dockerfile
Source Image:  us.icr.io/mynamespace/codeengine-build-source
Image:         us.icr.io/mynamespace/codeengine-build
Timeout:       10m0s

When you submit a build that pulls code from a local directory, your source code is packed into an archive file and uploaded to your IBM Cloud Container Registry instance. After the build run is completed, you can see your built image, such as codeengine-build, in the IBM Cloud Container Registry instance. You can also see a source image with -source appended to the name of your build, such as codeengine-build-source. You can delete this source image without impact.

For more information about builds, check the troubleshooting tips.