IBM Cloud Docs
Adjusting file share IOPS

Adjusting file share IOPS

For File Storage for VPC file shares, you can increase or decrease IOPS to meet your performance needs. Adjust IOPS by specifying a different IOPS tier profile (IOPS are adjusted within the selected profile), custom profile, or dp2 profile. The process of adjusting the IOPS causes no outage or lack of access to the storage.

Billing for an updated share is automatically updated. The prorated difference of the new price is added to the current billing cycle. The new full amount is then billed in the next billing cycle.

Adjustable IOPS concepts

You can adjust IOPS for your file shares to tailor performance to meet your requirements.

For example, you might find that an application scaled such that a lower-tier storage profile is now a performance bottleneck. You can change the performance characteristics of the existing file share by increasing IOPS by selecting a higher IOPS tier (for example, 3 IOPS/GB tier to 5 IOPS/GB tier).

In another scenario, you might want to initially set your file storage at a higher 10 IOPS/GB performance level to expedite a data upload. After the upload completes, you can reset storage to 5 IOPS/GB for normal operations. Also, you might want to increase your file share's IOPS during peak times for your application and decrease IOPS during off-peak hours.

By using this feature, you can:

  • Adjust IOPS up or down by selecting a different IOPS tier. IOPS is adjusted within the tier. The degree to which IOPS can be increased is determined by the maximum that is allowed by the file share's IOPS tier profile. You can adjust IOPS for an IOPS tier based on share size or select the next profile that allows for increased performance.

    The maximum IOPS for a file share for a 3 IOPS/GB tier profile is 96,000 IOPS. All other profiles are capped at 48,000 IOPS. For 96,000 IOPS to be realized, a single file share must be accessed by multiple virtual server instances. A single file share that is accessed by one instance is limited to 48,000 IOPS.

  • Adjust IOPS when you're using a custom IOPS or dp2 profile. The IOPS range is based on the file share size. For example, for a file share that's 25 GB, you can increase IOPS anywhere in the range 100-1,000 IOPS with a custom profile. If you later increase the size of a file share to the next highest band, you can increase the IOPS again.

  • Adjust IOPS from an IOPS tier profile to a custom or dp2 profile. In this case, the file share size restricts the custom or dp2 band that you select. For example, if you're adjusting IOPS for file share with a 3 IOPS/GB profile and it's 12,000 GB, you can adjust the IOPS by using a custom or dp2 profile. It's possible because both support a share size of 12,000 GB. If the file share size was greater than 16,000 GB, the custom profile would not support adjusting IOPS, but the dp2 profile would because it supports share sizes to 32,000 GB. The IOPS tier maximum sizes are 32,000 GB for 3 IOPS/GB, 9,600 GB for 5 IOPS/GB, and 4,800 GB for 10 IOPS/GB. When you move from a tiered profile to a custom or dp2 profile, billing is update based on the specified IOPS.

  • Adjust IOPS from a custom or dp2 profile to an IOPS tier profile. Again, you're restricted to which IOPS tier profile you can select by the file share size. When you move from a custom or dp2 profile to any tiered profile, billing is updated, and the IOPS is adjusted according to the profile.

To adjust a file share's IOPS, the file share must be in a stable state. Your user authorization is verified before IOPS is adjusted.

You can use the UI, the CLI, the API, or Terraform to adjust IOPS. You can adjust the file share's IOPS multiple times up to its maximum limit or reduce IOPS to its minimum limit.

You can monitor the progress of your file share's IOPS change from the UI or CLI. You can also use the Activity Tracker to verify that the IOPS were adjusted.

Limitations

The following limitations apply.

  • To adjust IOPS, the file share must be in a stable state.
  • For a file share created with an IOPS tier profile to increase or decrease IOPS, select a different profile for the file share size. If the file share size exceeds that of the new IOPS tier profile, you can't change the profile.
  • A custom IOPS profile can expand to the maximum allowed by the custom band. You can't switch custom bands unless you increase the file share size and then move to a higher band.
  • A dp2 profile can expand to the maximum allowed by the dp2 band. You can't switch dp2 bands unless you increase the file share size and then move to a higher band.
  • Adjusting IOPS by moving between profiles is restricted by the file share size.
  • When you use a custom or dp2 profile, IOPS can be adjusted multiple times until the maximum or minimum limit is reached.
  • The maximum IOPS for a file share for all profiles is 96,000 IOPS. For 96,000 IOPS to be realized, a single file share must be accessed by multiple virtual server instances. A single file share in an instance is limited to 48,000 IOPS.

Adjusting IOPS in the UI

Follow these steps to adjust IOPS by selecting a new IOPS tier or custom IOPS band:

  1. Go to the list of file shares. In the IBM Cloud console, click the Navigation Menu icon menu icon > VPC Infrastructure VPC icon > Storage > File shares. By default, file shares display for all resource groups in your region.

  2. In the File shares for VPC list page, click the name of a file share to see its details.

  3. On the file share details page, locate Profile and click the pencil icon or use the Actions menu and select Edit IOPS profile. Volumes must be attached to a virtual server instance for these actions.

  4. In the side panel, adjust IOPS as follows:

    • For an IOPS tier, select a different tier from the menu. For example, you might have a 3 IOPS/GB general-purpose profile that you want to increase to a 5 IOPS/GB profile.

    • For a custom IOPS or dp2 profile, the current IOPS value is shown and file share size. Enter a new IOPS value within the allowable range for that size.

  5. Review the estimated monthly order summary for your geography and new pricing.

  6. If you're satisfied, click Save and continue. Your new IOPS allocation is realized when you restart the instance.

Adjusting IOPS from the CLI

Adjusting IOPS for a Custom or dp2 profile

From the CLI, use the share-update command with the --iops property to indicate the new IOPS size for a custom or dp2 profile. The IOPS that you indicate must be within the range for the size of the file share (see Custom IOPS profile or dp2).

Before you can use the CLI, you must install the IBM Cloud CLI and the VPC CLI plug-in. For more information, see the CLI prerequisites.

  1. Locate your share from the CLI by listing your file shares in the region with the ibmcloud is shares command.

    $ ibmcloud is shares
Listing shares in all resource groups and region us-south under account Test Account as user test.user@ibm.com...
ID                                          Name                    Lifecycle state   Zone         Profile   Size(GB)   Resource group   Replication role   
r006-dc6a644d-c7da-4c91-acf0-d66b47fc8516   my-replica-file-share   stable            us-south-1   dp2       1500       Default          replica   
r006-e4acfa9b-88b0-4f90-9320-537e6fa3482a   my-source-file-share    stable            us-south-2   dp2       1500       Default          source   
r006-6d1719da-f790-45cc-9f68-896fd5673a1a   my-replica-share        stable            us-south-3   dp2       1500       Default          replica   
r006-925214bc-ded5-4626-9d8e-bc4e2e579232   my-new-file-share       stable            us-south-2   dp2       500        Default          none   
r006-b1707390-3825-41eb-a5bb-1161f77f8a58   my-vpc-file-share       stable            us-south-2   dp2       1000       Default          none   
r006-b696742a-92ee-4f6a-bfd7-921d6ddf8fa6   my-file-share           stable            us-south-2   dp2       1500       Default          source

  2. View the details of the file share that you want to modify with the ibmcloud is share command.

    $ ibmcloud is share my-file-share
Getting file share my-file-share under account Test Account as user test.user@ibm.com...
                             
ID                           r006-b696742a-92ee-4f6a-bfd7-921d6ddf8fa6   
Name                         my-file-share   
CRN                          crn:v1:bluemix:public:is:us-south-2:a/a1234567::share:r006-b696742a-92ee-4f6a-bfd7-921d6ddf8fa6   
Lifecycle state              stable   
Access control mode          security_group   
Zone                         us-south-2   
Profile                      dp2   
Size(GB)                     1000   
IOPS                         1000   
Encryption                   provider_managed   
Mount Targets                ID                                          Name      
                             r006-dd497561-c7c9-4dfb-af0a-c84eeee78b61   my-cli-share-mount-target-1      
                             
Resource group               ID                                 Name      
                             db8e8d865a83e0aae03f25a492c5b39e   Default      
                             
Created                      2023-10-18T22:15:15+00:00   
Replication role             none   
Replication status           none   
Replication status reasons   Status code   Status message      
                             -             -

  3. Use the ibmcloud is share-update command to increase or decrease the IOPS of your file share.

    $ ibmcloud is share-update my-file-share --iops 2000
Updating file share my-file-share under account Test Account as user test.user@ibm.com...
                             
ID                           r006-b696742a-92ee-4f6a-bfd7-921d6ddf8fa6   
Name                         my-file-share   
CRN                          crn:v1:bluemix:public:is:us-south-2:a/a1234567::share:r006-b696742a-92ee-4f6a-bfd7-921d6ddf8fa6   
Lifecycle state              updating   
Access control mode          security_group   
Zone                         us-south-2   
Profile                      dp2   
Size(GB)                     1000   
IOPS                         2000   
Encryption                   provider_managed   
Mount Targets                ID                                          Name      
                             r006-dd497561-c7c9-4dfb-af0a-c84eeee78b61   my-cli-share-mount-target-1      
                             
Resource group               ID                                 Name      
                             db8e8d865a83e0aae03f25a492c5b39e   Default      
                             
Created                      2023-10-18T22:15:15+00:00   
Replication role             none   
Replication status           none   
Replication status reasons   Status code   Status message      
                             -             -

For more information about the command options, see ibmcloud is share-update my-file-share.

Adjusting IOPS by specifying a different IOPS tier profile

These instructions are for the previous generation of file share profiles (general purpose, 5-iops, 10-iops, or custom). New file shares can be provisioned with only the dp2 profile. To access the latest features, you must change the IOPS profile of your share to dp2.

From the CLI, use the ibmcloud is share-update command with the --profile property and indicate the name or href of the IOPS tier profile.

The following example changes a 3 IOPS/GB profile to a 5 IOPS/GB profile. In this case, the file share can't exceed 9,600 GB to move to the higher profile.

ibmcloud is share-update my-file-share --profile tier-5iops
Updating file share my-file-share under account VPC1 as user user@mycompany.com...

ID                ba7c7c8a-c111-4f54-a7fe-bb6d3d66eb2a
Name              my-file-share
CRN               crn:v1:bluemix:public:is:us-south-1:a/a1234567::share:ba7c7c8a-c111-4f54-a7fe-bb6d3d66eb2a
Lifecycle state   updating
Zone              us-south-1
Profile           tier-5iops
Size(GB)          100
IOPS              3000
Encryption        provider_managed
Mount targets     ID                          Name   VPC ID   VPC Name
                  No mounted targets found.

Resource group    ID                                     Name
                  7f1645c5-8afa-4a7e-860d-3df563e0aa8d   Default

Created           2023-02-26T20:01:18+05:30
Last sync at      2023-02-26T05:53:28+05:53
Latest job        Job status   Job status reasons
                  succeeded    -

For more information about the command options, see ibmcloud is share-update my-file-share.

Adjusting IOPS with the API

You can adjust IOPS for existing data file shares by calling the Virtual Private Cloud (VPC) API.

Adjusting IOPS for a Custom or dp2 profile

Make a PATCH /shares request and specify the iops property to adjust the IOPS within the allowable range for a custom pr dp2 profile.

You can't update the name of the file share and adjust IOPS in the same PATCH /shares request. Make two PATCH /shares requests.

The following example shows an increase of 100 IOPS to 3,000 IOPS for a 100 GB file share based on a 100 - 499 custom profile. The IOPS range for this custom band is 100 - 6,000 IOPS.

curl -X PATCH \
 "$vpc_api_endpoint/v1/shares/$share_id?version=2023-08-086&generation=2" \
 -H "Authorization: $iam_token" \
 -d '{
      "iops": 3000
    }'

The file share status shows updating while the IOPS is being adjusted. The current IOPS is shown until you restart the instance. In the following example, IOPS is adjusted 100 - 3000 for the 3 IOPS/GB profile.

{
   "created_at": "2023-08-08T22:58:49.000Z",
   "crn": "crn:[...]",
   "encryption": "provider_managed",
   "href": "https://us-south.iaas.cloud.ibm.com/v1/shares/r006-a0c07083-f411-446c-9316-7b08d6448c86",
   "id": "r006-a0c07083-f411-446c-9316-7b08d6448c86",
   "iops": 100,
    .
    .
    .
	"status": "updating",
    .
    .
    .
}

When the IOPS expansion completes, restart the instance. The new value is displayed, and the file share status is stable.

{
  "created_at": "2023-08-08T22:58:49.000Z",
  "crn": "crn:[...]",
  "encryption": "provider_managed",
  "href": "https://us-south.iaas.cloud.ibm.com/v1/shares/a0c07083-f411-446c-9316-7b08d6448c86",
  "id": "a0c07083-f411-446c-9316-7b08d6448c86",
  "iops": 3000,
  "lifecycle_state": "stable",
  "name": "my-share-updated",
  "profile": {
    "href": "https://us-south.iaas.cloud.ibm.com/v1/share/profiles/tier-3iops",
    "name": "custom",
    "resource_type": "share_profile"
  },
  "replication_role": "none",
  "replication_status": "none",
  "replication_status_reasons": [],
  "resource_group": {
    "crn": "crn:[...]",
    "href": "https://resource-controller.cloud.ibm.com/v2/resource_groups/678523bcbe2b4eada913d32640909956",
    "id": "678523bcbe2b4eada913d32640909956",
    "name": "Default"
  },
  "resource_type": "share",
  "size": 4800,
  "mount_targets": [
    {
      "href": "https://us-south.iaas.cloud.ibm.com/v1/shares/a0c07083-f411-446c-9316-7b08d6448c86/mount_targets/1b5571cb-536d-48d0-8452-81c05c6f7b80",
      "id": "r006-1b5571cb-536d-48d0-8452-81c05c6f7b80",
      "name": "my-mount-target",
      "resource_type": "share_target",
      "vpc": {
        "crn": "crn:[...]",
        "href": "https://us-south.iaas.cloud.ibm.com/v1/vpcs/r006-12bb28fc-856d-4902-813b-dc065d1ed084",
        "id": "12bb28fc-856d-4902-813b-dc065d1ed084",
        "name": "my-vpc",
        "resource_type": "vpc"
      }
    }
  ],
  "user_tags": [],
  "zone": {
    "href": "https://us-south.iaas.cloud.ibm.com/v1/regions/us-south/zones/us-south-1",
    "name": "us-south-1",
    "resource_type": "zone"
  }
}

Adjusting IOPS by specifying a different IOPS tier profile

These instructions are for the previous generation of file share profiles (general purpose, 5-iops, 10-iops, or custom). New file shares can be provisioned with only the dp2 profile. To access the latest features, you must change the IOPS profile of your share to dp2.

Make a PATCH /shares request and specify the profile property and indicate the name or href of the IOPS tier profile.

The following example changes a 3 IOPS/GB profile to a 5 IOPS/GB profile. In this case, the file share can't exceed 9,600 GB to move to the higher profile.

curl -X PATCH \
 "$vpc_api_endpoint/v1/shares/$share_id?version=2023-07-18&generation=2" \
 -H "Authorization: $iam_token" \
 -d '{
      "profile": "5iops-tier"
    }'

Adjusting IOPS with Terraform

You can adjust IOPS for existing data file shares in Terraform.

Adjusting IOPS for a Custom or dp2 profile

To modify the performance level of a file share, use the ibm_is_share resource and provide the IOPS value that you want. When you specify the IOPS value, make sure it is within the performance range for the size of the file share. For more information, see dp2 file storage profile.

When it is applied, the following example updates the share performance to 5000 IOPS.

resource "ibm_is_share" "example" {
  name    = "my-new-share"
  size    = 200
  iops    = 5000
  profile = "dp2"
  zone    = "us-south-2"
}

For more information about the arguments and attributes, see ibm_is_share.

Adjusting IOPS by specifying a different IOPS tier profile

To modify the performance level of a file share with an IOPS tier profile, use the ibm_is_share resource and specify a different IOPS tier. When it is applied, the following example updates the share performance to 5000 IOPS.

resource "ibm_is_share" "example" {
  name    = "my-share"
  size    = 220
  profile = "tier-5iops"
  zone    = "us-south-2"
}

For more information about the arguments and attributes, see ibm_is_share.

Next steps

Create more file shares or manage your existing shares: