Registering a DNS subdomain for an NLB

This content is specific to NLBs in classic clusters. For VPC clusters, see Registering a VPC load balancer hostname with a DNS subdomain.

After you set up network load balancers (NLBs), you can create DNS entries for the NLB IPs by creating subdomains. You can also set up TCP/HTTP(S) monitors to health check the NLB IP addresses behind each subdomain.

Subdomain: When you create a public NLB in a single-zone or multizone cluster, you can expose your app to the internet by creating a subdomain for the NLB IP address. Additionally, IBM Cloud takes care of generating and maintaining the wildcard SSL certificate for the subdomain for you. In multizone clusters, you can create a subdomain and add the NLB IP address in each zone to that subdomain DNS entry. For example, if you deployed NLBs for your app in three zones in US-South, you can create the subdomain mycluster-a1b2cdef345678g9hi012j3kl4567890-0001.us-south.containers.appdomain.cloud for the three NLB IP addresses. When a user accesses your app subdomain, the client accesses one of these IPs at random, and the request is sent to that NLB.

You currently can't create subdomains for private NLBs.

Health check monitor: Enable health checks on the NLB IP addresses behind a single subdomain to determine whether they are available or not. When you enable a monitor for your subdomain, the monitor health checks each NLB IP and keeps the DNS lookup results updated based on these health checks. For example, if your NLBs have IP addresses 1.1.1.1, 2.2.2.2, and 3.3.3.3, a normal operation DNS lookup of your subdomain returns all 3 IPs, 1 of which the client accesses at random. If the NLB with IP address 3.3.3.3 becomes unavailable for any reason, such as due to zone failure, then the health check for that IP fails, the monitor removes the failed IP from the subdomain, and the DNS lookup returns only the healthy 1.1.1.1 and 2.2.2.2 IPs.

You can see all subdomains that are registered for NLB IPs in your cluster by running the following command.

ibmcloud ks nlb-dns ls --cluster <cluster_name_or_id>

DNS microservice updates are asynchronous and might take several minutes to apply. Note that if you run an ibmcloud ks nlb-dns command and receive a 200 confirmation message, you might still have to wait for your changes to be implemented. To check the status of your subdomain, run ibmcloud ks nlb-dns ls and find the Status column in the output.

Registering NLB IPs with a DNS subdomain

Expose your app to the public internet by creating a subdomain for the network load balancer (NLB) IP address.

Before you begin:

Review the following limitations.
- You can't create subdomains for private NLBs.
- You can register up to 128 subdomains. This limit can be lifted on request by opening a support case.
Create an NLB for your app in a single-zone cluster or create NLBs in each zone of a multizone cluster.

To create a subdomain for one or more NLB IP addresses:

Get the EXTERNAL-IP address for your NLB. If you have NLBs in each zone of a multizone cluster that expose one app, get the IPs for each NLB.

kubectl get svc

In the following example output, the NLB EXTERNAL-IPs are 168.2.4.5 and 88.2.4.5.

NAME             TYPE           CLUSTER-IP       EXTERNAL-IP       PORT(S)                AGE
lb-myapp-dal10   LoadBalancer   172.21.xxx.xxx   168.2.4.5         1883:30303/TCP         6d
lb-myapp-dal12   LoadBalancer   172.21.xxx.xxx   88.2.4.5          1883:31303/TCP         6d

Register the IP by creating a DNS subdomain. To specify multiple IP addresses, use multiple --ip options.
```
ibmcloud ks nlb-dns create classic --cluster <cluster_name_or_id> --ip <NLB_IP> --ip <NLB2_IP> 
```

Verify that the subdomain is created.

ibmcloud ks nlb-dns ls --cluster <cluster_name_or_id>

Example output

Hostname                                                                                IP(s)              Health Monitor   SSL Cert Status           SSL Cert Secret Name
mycluster-a1b2cdef345678g9hi012j3kl4567890-0001.us-south.containers.appdomain.cloud     ["168.2.4.5"]      None             created                   <certificate>

Optional: Set up a custom domain to point to the IBM-provided subdomain that you created in the previous step.
1. Register a custom domain by working with your Domain Name Service (DNS) provider or by using IBM Cloud DNS.
2. Define an alias for your custom domain by specifying the IBM-provided subdomain as a Canonical Name record (CNAME).
In a web browser, enter the URL to access your app through the subdomain that you created.

Next, you can enable health checks on the subdomain by creating a health monitor.

Understanding the subdomain format

Subdomains for NLBs follow the format <cluster_name>-<globally_unique_account_HASH>-0001.<region>.containers.appdomain.cloud.

For example, a subdomain that you create for an NLB might look like mycluster-a1b2cdef345678g9hi012j3kl4567890-0001.us-south.containers.appdomain.cloud. The following table describes each component of the subdomain.

Table 1. Understanding the NLB subdomain format
NLB subdomain component	Description
`*`	The wildcard for the subdomain is registered by default for your cluster.
`<cluster_name>`	The name of your cluster. - If the cluster name is 26 characters or fewer and the cluster name is unique in this region, the entire cluster name is included and is not modified: `myclustername`. If the cluster name is 26 characters or fewer and there is an existing cluster of the same name in this region, the entire cluster name is included and a dash with six random characters is added: `myclustername-ABC123`. If the cluster name is 26 characters or greater and the cluster name is unique in this region, only the first 24 characters of the cluster name are used: `myveryverylongclusternam`. If the cluster name is 26 characters or greater and there is an existing cluster of the same name in this region, only the first 17 characters of the cluster name are used and a dash with six random characters is added: `myveryverylongclu-ABC123`.
`<globally_unique_account_HASH>`	A globally unique HASH is created for your IBM Cloud account. All subdomains that you create for NLBs in clusters in your account use this globally unique HASH.
`0001`	Acts as a counter for each subdomain that you create.
`<region>`	The region that the cluster is created in.
`containers.appdomain.cloud`	The subdomain for IBM Cloud Kubernetes Service subdomains.

Enable health checks on a subdomain by creating a health monitor

Enable health checks on the NLB IP addresses behind a single subdomain to determine whether they are available or not.

Before you begin, register NLB IPs with a DNS subdomain.

Get the name of your subdomain. In the output, note that the host has a monitor Status of Unconfigured.

ibmcloud ks nlb-dns monitor ls --cluster <cluster_name_or_id>

Example output

Hostname                                                                                   Status         Type    Port   Path
mycluster-a1b2cdef345678g9hi012j3kl4567890-0001.us-south.containers.appdomain.cloud        Unconfigured   N/A     0      N/A

Create a health check monitor for the subdomain. If you don't include a configuration parameter, the default value is used.
```
ibmcloud ks nlb-dns monitor configure --cluster <cluster_name_or_id> --nlb-host <host_name> --enable --description <description> --type <type> --method <method> --path <path> --timeout <timeout> --retries <retries> --interval <interval> --port <port> --header <header> --expected-body <expected-body> --expected-codes <expected-codes> --follows-redirects <true> --allows-insecure <true>
```
-c, --cluster <cluster_name_or_ID>

Required: The name or ID of the cluster where the subdomain is registered.

--nlb-host <host_name>

Required: The subdomain to enable a health check monitor for.

--enable

Required: Enable the health check monitor for the subdomain.

--description <description>

A description of the health monitor.

--type <type>

The protocol to use for the health check: HTTP, HTTPS, or TCP. Default: HTTP.

--method <method>

The method to use for the health check. Default for type HTTP and HTTPS: GET. Default for type TCP: connection_established

--path <path>

When type is HTTPS: The endpoint path to health check against. Default: /

--timeout <timeout>

The timeout, in seconds, before the IP is considered unhealthy. Default: 5.

--retries <retries>

When a timeout occurs, the number of retries to attempt before the IP is considered unhealthy. Retries are attempted immediately. Default: 2.

--interval <interval>

The interval, in seconds, between each health check. Short intervals might improve failover time, but increase load on the IPs. Default: 60.

--port <port>

The port number to connect to for the health check. When type is TCP, this parameter is required. When type is HTTP or HTTPS, define the port only if you use a port other than 80 for HTTP or 443 for HTTPS. Default for TCP: 0. Default for HTTP: 80. Default for HTTPS: 443.

--header <header>

When type is HTTP or HTTPS: The HTTP request headers to send in the health check, such as a Host header. The User-Agent header can't be overridden. To add more than one header to the requests, specify this option multiple times. This option accepts values in the following format: --header Header-Name=value. When updating a monitor, the existing headers are replaced by the ones that you specify. To delete all existing headers, specify the option with an empty value (--header "").

--expected-body <expected-body>

When type is HTTP or HTTPS: A case-insensitive substring that the health check looks for in the response body. If this string is not found, the IP is considered unhealthy.

--expected-codes <expected-codes>

When type is HTTP or HTTPS: HTTP codes that the health check looks for in the response. If the HTTP code is not found, the IP is considered unhealthy. Default: 2xx.

--allows-insecure <true>

When type is HTTP or HTTPS: Set to true to not validate the certificate.

--follows-redirects <true>

When type is HTTP or HTTPS: Set to true to follow any redirects that are returned by the IP.

Example command
```
ibmcloud ks nlb-dns monitor configure --cluster mycluster --nlb-host mycluster-a1b2cdef345678g9hi012j3kl4567890-0001.us-south.containers.appdomain.cloud --enable --description "Login page monitor" --type HTTPS --method GET --path / --timeout 5 --retries 2 --interval 60 --header Host=example.com --header Origin=https://akamai.com --expected-body "healthy" --expected-codes 2xx --follows-redirects true
```

Verify that the health check monitor is configured with the correct settings.

ibmcloud ks nlb-dns monitor get --cluster <cluster_name_or_id> --nlb-host <host_name>

Example output

Created On:         2019-04-24 09:01:59.781392 +0000 UTC
Modified On:        2020-02-26 15:39:05.273217 +0000 UTC
Type:               https
Description:        Health check monitor for ingress public hostname
Method:             GET
Path:               /alive
Expected Body:      -
Expected Codes:     2xx
Follow Redirects:   false
Allow Insecure:     true
Port:               443
Timeout:            5
Retries:            2
Interval:           15

Headers:
Origin:    https://akamai.com
Host:      example.com

Health Monitor Apply Properties Status:   success

View the health check status of your subdomain.

ibmcloud ks nlb-dns monitor ls --cluster <cluster_name_or_id>

Example output

Hostname                                                                                Status      Type    Port   Path
mycluster-a1b2cdef345678g9hi012j3kl4567890-0001.us-south.containers.appdomain.cloud     Healthy     https   443    /alive

Updating and removing IPs and monitors from subdomains

You can add and remove NLB IP addresses from subdomains that you have generated. You can also disable and enable health check monitors for subdomains as needed.

NLB IPs

If you later add more NLBs in other zones of your cluster to expose the same app, you can add the NLB IPs to the existing subdomain.

ibmcloud ks nlb-dns add --cluster <cluster_name_or_id> --ip <NLB_IP> --ip <NLB2_IP> ... --nlb-host <host_name>

You can also remove IP addresses of NLBs that you no longer want to be registered with a subdomain. Note that you must run the following command for each IP address that you want to remove. If you remove all IPs from a subdomain, the subdomain still exists but no IPs are associated with it.

ibmcloud ks nlb-dns rm classic --cluster <cluster_name_or_id> --ip <ip> --nlb-host <host_name>

Health check monitors

If you need to change your health monitor configuration, you can change specific settings. Include only the options for the settings that you want to change.

ibmcloud ks nlb-dns monitor configure --cluster <cluster_name_or_id> --nlb-host <host_name> --description <description> --type <type> --method <method> --path <path> --timeout <timeout> --retries <retries> --interval <interval> --port <port> --header <header> --expected-body <expected-body> --expected-codes <expected-codes> --follows-redirects <true> --allows-insecure <true>

You can disable the health check monitor for a subdomain at any time by running the following command:

ibmcloud ks nlb-dns monitor disable --cluster <cluster_name_or_id> --nlb-host <host_name>

To re-enable a monitor for a subdomain, run the following command:

ibmcloud ks nlb-dns monitor enable --cluster <cluster_name_or_id> --nlb-host <host_name>